Unused Crushing Plant Support Installations - Rabin Worldwide

Auctions & Liquidations

Unused Crushing Plant Support Installations

  • February 5, 2021
  • Dunkirk, France
  • Timed Online Auction
AUCTION COMPLETED

Purchased new for Uranium Heap Leach Mine Project

All components located in Dunkirk France

For more information, please contact A.M. King
1-530-534-7965 | brad@amking.com

COVID-19 Update

Due to social distancing practices to prevent the spread of the novel Coronavirus (COVID-19), removal of items after the sale might be by appointment only, depending on local legislation at the time of the sale.

We are closely monitoring the directives of the WHO regarding these restrictions and following guidelines from the local health departments. Rabin is dedicated to providing a safe and clean environment for our customers.

Over €24 Million Euro-dollar Purchase Cost Featuring

Item 1

Renault GIMAEX Fire Truck

This TRIEXT is a water, foam and powder fire fighter with

  • POK PRIMATOR cannon with adjustable pressure jet
  • TEKLITE TF 340 telescopic mast with 4m extension
  • 250 kg powder reserve tank plus 20-liter nitrogen bottle
  • 24 Voltage electrical system with mechanical cut-off
  • GIMAEX cockpit control, mast & rear control panel

Item 2

All Terrain 8×8 Lube Truck

  • Heavy duty lube system mounted on Renault 8×8 chasis
  • Lubrication equipment provided by LaFon Technologies
  • Includes (8) stainless tanks, air compressor and pumps
  • All equipment integrated into a modified ISO container
  • 24 Volt high amperage electronic system with digital display
  • Wheels & tires: G.385/65RH + 315 / 80R22.5 RHD2+

Item 3

Compressed Air System # 2

Two of (2) compressed air systems supporting emulsion plant with

  • (3) Dalakiran model DVK-125 rotary screw air compressors
  • Integrated air cooler, filter and water separator
  • BEKO-Germany Mat 30 oil water separator
  • MIKROPOR high efficiency air-line filter, model GO1820MX
  • Model DHT-5 wet air receiver with 16-24 bar design & test pressure

Item 4

Fire Water Pump System

Designed with redundant diesel backup systems consisting of:

  • Flowserve diesel main water pump with Cummins power
  • Flowserve main fire water pump with Leroy Somers electric motor
  • (2) Flowserve multi V3604 jockey pumps with control panels
  • Silencer, air & pressure release valves, suction spool & discharge
  • Full set of spare parts for commission and start up

Item 5

KSB Pump Package

Set of (12) KSB centrifugal sludge pumps includes:

  • (4) KSB Amarex model NF 50-170 vertical submersible pumps
  • (2) KSB Amarex model NF 50-220 vertical submersible pumps
  • (2) KSB Amarex model NF 50-170 (107) vertical submersible pumps
  • (2) KSB Amarex model NF 50-220 (150) vertical submersible pumps
  • (2) KSB Sewatec model F 50-250G dry type horizontal pump sets

Item 6

(3) Stockpile Belt Feeders

Each belt feeder comes fully equipped with drive system, motor,
endless belt, pulleys, idlers, jack screw, belt cleaners, frame,
hopper, chute, wear plating, wear rubber, take-up-beams, various
sensors and switches, horn, beacon and a full SPILE BAR assembly.
This package of (3) feeders comes with hydraulic tools and hammers.
Review full list of equipment and components

Item 7

(2) Secondary Belt Feeders

Each belt feeder comes fully equipped with drive system, motor,

endless belt, pulleys, idlers, jack screw, belt cleaners, frame,

hopper, chute, wear plating, wear rubber, take-up-beams, various

sensors and switches, horn, beacon and a full SPILE BAR assembly.

This package of (2) feeders comes with hydraulic tools and hammers.

Review full list of equipment and components

Item 8

(4) Tertiary Belt Feeders

Each belt feeder comes fully equipped with drive system, motor,

endless belt, pulleys, idlers, jack screw, belt cleaners, frame,

hopper, chute, wear plating, wear rubber, take-up-beams, various

sensors and switches, horn, beacon and a full SPILE BAR assembly.

This package of (4) feeders comes with hydraulic tools and hammers.

Review full list of equipment and components

Item 9

(2) Agglomeration Belt Feeders

Each belt feeder comes fully equipped with drive system, motor,

endless belt, pulleys, idlers, jack screw, belt cleaners, frame,

hopper, chute, wear plating, wear rubber, take-up-beams, various

sensors and switches, horn, beacon and a full SPILE BAR assembly.

This package of (2) feeders comes with hydraulic tools and hammers.

Review full list of equipment and components

Item 10

Over-Band Belt Magnets

Package of (3) LUX Continuous Electromagnet Systems as follows:

  • Unit 1: Lux Ovel 860-1412/50, 8600 watt DC current
  • Unit 2: Lux Ovel 920-1214/60, 9200 watt DC current
  • Unit 3: Lux Ovel 1100-1614/60, 11,000 watt DC current
  • Belt widths of 1200 & 1400 mm, thickness of 12 mm
  • Each with Isolation tranformers in waterproof enclosures

Item 11

Belt Weigher & Metal Scanning Systems

Package supports RBL Conveyor Matrix and includes

  • (4) Metcorr metal detectors, models 117C-12 & 117C-16
  • Designed for detection of ferrous and non-ferrous metals
  • (7) Schenk dual & triple idler belt weigher assemblies
  • Full compliment of electrical sensors for weighing and detection
  • Associated framework, weights for calibration and installation drawings

Item 12

Conveyor Belting Package

NEVER USED, NEVER ASSEMBLED

This is a package of 4,187 meters of conveyor belt ranging in width from 800 to 1600mm.
All the conveyor belt has been stored indoors since 2014 as shown in the pictures.
See additional pictures, full specifications and original packing lists provided.

This package will also be offered in the entirety conveyor package #24

Item 13

 Siemens Flender Gearbox Package

Package of (15) large gearbox sets manufactured by SIEMENS / FLENDER.

These solid shaft gearboxes each include: an internal backstop torque reaction arm, (2) couplers, swing base,
and Leroy Somer motor. See attached pages for size details, specifications and additional information
about the gearboxes and couplers included.

This package will also be offered in the entirety conveyor package #24

Item 14

Leroy Somer Gearbox Package

Package of (11) gearbox assemblies manufactured and assembled by Leroy Somer.
Originally built for a mining conveyor system, these solid hollow shaft gearboxes come assembled
with an internal backstop torque reaction arm, brake and Leroy Somer motor.

This package will also be offered in the entirety conveyor package #24

Item 15

Crushed Ore Samplers

This package of (2) Material Samplers were provided by ITECA Socadei in France. Unit 1

Is a linear bucket cutter sampler (model EGTR), which provides a sweep motion to the side

of the conveyor at a constant flow rate. Unit 2 is a rotating cup sampler (model PGR) which is

based upon a pivoting assembly which cuts across the entire stream of product, providing

accurate representative samples or ore.

Item 16

Schneider MCC Switchboards

  • This never used, never assembled modular switchgear package features
  • (2) Schneider Blokset switchboards consisting of (6) sections each. Blokset
  • panels are designed specifically for internal arc and short circuit protection.
  • They can operate in harsh environments prone to seismic activity.
  • All components are in original shipping crates and available with the
  • Schneider package of (19) Modicon M-340 PLC controllers (itemized separately)

Item 17

Schneider PLC Controllers

Package of (19) MODICON M-340 PLC’s feature

  • All in one CPU’s with multitasking for guaranteed reflex
  • Memory programing code up to 70 Kinst with backup memory
  • Flexible use with Modicon X80 I/O and M580 platforms
  • Central PLC control cabinet plus (18) localized cabinets
  • Ethernet and radio communication network throughout

Item 18

Dorce Modular Office Complex

(17) Prefabricated modular offices with restroom facilities

  • Manufactured by Dorce in 2015 and still in shipping containers
  • Air conditioning, ventilation equipment and fans included
  • Toilets, sinks, plumbing fixtures and lighting provided
  • Independent electrical panel distribution for 400V, 3 phase, 50 Hz
  • Rock wool insulation with 124mm external wall thickness

Item 19

Potable Water Treatment System

Housed in air conditioned 40’ HC container with

  • Well water, reject, and filtered water tanks with pumps
  • Static mixers, flocculant dosing units, sand & carbon filters
  • Chiller, heat exchanger, plus 304 stainless pipework
  • MCC/PLC controls housed in additional 20’ container
  • Both 20’ and 40’ air conditioned containers are included

Item 20

Oily Water Treatment System

This ion exchange treatment plant is designed to remove oil

and suspended solids from rain water and wash water collected

from different areas of an industrial job site. The tilted plate separator

has a dissolved air flotation (DAF) treatment stage along with dosing

systems and an outboard pipe flocculator. The plant is designed to

incorporate a compressed air system and complete with PLC controls

Item 21

Additive & Dosing System

This skid mounted additive preparation system is designed by Milton Roy

to dose and mix sodium or calcium hypochlorite to disinfect water.

Partial listing of system includes pump, atmospheric mix tank, magnetic

level gauge and switch, plus full compliment of valves, strainer and calibration pot.

A local control panel provides manual start and stop functions, in addition to

automatic stop function in case of low liquid level in skid mounted tank

Item 22

Telecom Package

Features and components of Alcatel-Lucent Telecom package

  • Tetra radio network for radio communication on ROHILL solution
  • Fixed telephone network for VoIP telephony OmniPCX Enterprise
  • LAN supporting VoIP telephony and data communications
  • IT sub-system for servers, pcs, workstations and printers
  • Optical fiber sub system with TETRA mobile dispatching stations

Item 23

Emerson Uninterruptible Power Supply

These two UPS units, one AC and one DC, provide high quality power for

electronic equipment loads. Features include high input power factor,

full compatibility with all types of loads, power black-out protection,

operating temperatures from 0 to 40 degree centigrade. Application utilizes

double conversion topology; in AC it converts AC power into DC power

for battery charge, and reconverts back into clean AC power mode.

Item 24

Bearings and Pillow Blocks

This package consists of a new & never used inventory of SKF spherical roller bearings,

pillow blocks and seals, the majority of which were purchased to support approximately

1800 meters of conveyor associated with the planned mine crushing plant installation.

In addition to bearings and pillow blocks, this package includes Trelleborg shock absorbers,

Iteca Socade speed sensors, Vega level switches, and Schneider limit switches.

Load More

General Information

For more information, please contact A.M. King
1-530-534-7965 | brad@amking.com

IN PARTNERSHIP WITH

Google Map